Home Page American Government Reference Desk Shopping Special Collections About Us Contribute



Escort, Inc.






GM Icons
By accessing/using The Crittenden Automotive Library/CarsAndRacingStuff.com, you signify your agreement with the Terms of Use on our Legal Information page. Our Privacy Policy is also available there.

Friction is the Key to Good Car Brakes


Topics:  Mazda

Friction is the Key to Good Car Brakes

Anthony Fontanelle
September 27, 2007

The brake system of one's Mazda works in full coordination with all of its systems. Flooring on the brake pedal, the car transmits the force from the foot to its brakes through a fluid. Since the actual brakes require a much greater force than one could apply with his leg, the car must multiply the force of one's foot as well. The brakes then would transmit the force to the tires using friction, and the tires transmit that force to the road using friction, too. Given this, the Mazda driver must take constant note of his Mazda Brake Pads.

The Mazda Brake Pads are engineered for high friction. They have brake pad material integrated in the disc in the bedding process while wearing evenly. It is a common knowledge that the pad material contacts the disc metal to stop the car. However, the pads actually work with a very thin layer of their own material, producing a semi-liquid friction boundary that causes the actual braking force. There are varying disc wear rates depending on the properties of the material. The properties that define material wear include trade-offs between performance and longevity.

Regular replacement of the Mazda Brake Pads is a must. Most of these products are designed to provide the driver a warning that the replacement needs to be done immediately. While some have a thin piece of soft metal that induces the brakes to squeal when the pads are already too thin, others have a soft metal tab included in the pad material that closes an electric circuit and gives a warning light to signal the thinning of the brake pad. Expensive cars usually have an electronic sensor. Most all road-going vehicles have only two brake pads per caliper and racing calipers have up to six pads. For enhanced performance, the latter have different frictional properties in a staggered pattern.

Many aftermarket parts have released their own line of brake pads, some even made specially for racing purposes. Mazda Brake Pads are well-appreciated by the consumers because they are able to meet the requirements of both the common driver and the speed-hungry one. So if replacing one's brake pads seem like a task, then perhaps he should think about getting the Mazda Brake Pads.

Source:  Amazines.com




The Crittenden Automotive Library